Perimeter Security

START_IR_Flashin_field

IR Burst

START® IR Burst™ by WilliamsRDM enhances an existing game camera’s ability to take better, more useful photos at night by extending the distance of the built-in IR flash. This system uses infrared light much like a professional photographer uses “flashes” to light a subject from different distances and angles. The light is synced with the camera, but is mostly invisible to the naked eye. It can be used to increase the visible range of the camera or to add light to gain detail in the photo.

Camo Wrapz

When deploying Covert Sensors camouflaging the sensors is important. Equally important is the speed that these sensors can be installed and camouflaged. A perfectly covert system is of no use if camouflaging that system took too long to install. The installation could have been observed, or the site may have been unintentionally trampled both leading to a perfectly covert system site being burned. Ideally the sensor and its camouflage should be deployed in a matter of minutes. Any longer and the installation time may be the reason the sensor site is identified. The compromise between efficiency of deployment and the time it takes to properly camouflage a sensor is the reason we developed the camouflage wrap.

Camouflage wraps are flexible sheets of a textured rubber like material.

They are UV resistant and take paint very well. They can be used to wrap sensors, including cameras, quickly in the outdoor environment. Touch up paint can be applied if needed to complete the process. Camouflage wraps come in 12″ x 12″ sheets and can be easily cut into strips or any other shape that allows for easy application to specific sensors. Typical methods of attachment are staples, screws and in some cases double sided tape. If care is taken in removing the wrap, it can be reused.

Camouflage wraps come in a range of base colors: Tan, Dark Green, Charcoal and grey.

There are currently two textures available an aggressive textured wood and a smoother wood texture. The aggressive texture is good for camouflaging object on trees with thick bark, the deep grooves also allow for a natural look for larger items. The less aggressive texture is perfect for camouflaging objects in areas with younger trees or even wooden planks. Other textures are under development.

Recent advancement is our manufacturing process have allowed us to cut the price of this product. The final price is still being analyzed for additional savings. Please contact us for the most up-to date cost.

Key Features

  • UV resistant material
  • Paintable
  • Flexible
  • Multiple textures available
    (((ADD THE ‘CAMOUFLAGE WRAP SPECS’ TABLE FROM THE BOTTOM OF THIS PAGE: https://williamsrdmdev.com/startnetwork/public/index.php/camouflage-wraps/)))
WRDM-E-START-Covert_Camera
WRDM-E-START-Sensor_Node_body

Sensor Node

Sensor and cluster nodes are designed to withstand the harsh environments with temperature cycles of extreme heat and cold, rain, sleet, snow, etc. The sensor node can have an antenna mounted directly on its enclosure or a standard PVC Pipe can be used to elevate the antenna above grass and vegetation. The coupler on the bottom can be attached to a threaded spike driven into the ground prior to the sensor node being connected.

All electronics are completely enclosed to withstand moisture and temperature swings. It measures 1.5 in. wide by 8 in. tall and 2 in. depth. The following shows the Sensor node deployed with the extension pole for the radio. Notice how it blends in with the greenery around it.

Key Features

  • Approximately 1.5” x 2.5” x 8″
  • Environmentally hardened
  • Solar & Battery powered
  • Multi-year service life
  • GPS equipped for precise location
  • False alarm reduction through advanced signal processing algorithms to provide first tier of false detection filtering.

Cluster Node

Sensor and cluster nodes are designed to withstand the harsh environments with temperature cycles of extreme heat and cold, rain, sleet, snow, etc. The sensor node can have an antenna mounted directly on its enclosure or a standard PVC Pipe can be used to elevate the antenna above grass and vegetation. The coupler on the bottom can be attached to a threaded spike driven into the ground prior to the sensor node being connected.

All electronics are completely enclosed to withstand moisture and temperature swings. It measures 1.5 in. wide by 8 in. tall and 2 in. depth. The following shows the Sensor node deployed with the extension pole for the radio. Notice how it blends in with the greenery around it.

Key Features

  • Approximately 1.5” x 2.5” x 8″
  • Environmentally hardened
  • Solar & Battery powered
  • Multi-year service life
  • GPS equipped for precise location
  • False alarm reduction through advanced signal processing algorithms to provide the first tier of false detection filtering.
Bag